木工刀具网

 找回密码
 注册

QQ登录

只需一步,快速开始

互动
互动
技术
技术
相关
相关
展示
展示
木工刀具网 Woodwrking Tools router bit 查看内容

Router Bit Comparison

2012-9-14 11:12| 发布者: 文子| 查看: 6410| 评论: 0|原作者: tideway浪潮

摘要: I was sent two router bits to compare. One is a famous name bit and the other is a bit that claims to be better. Executive summary: The less expensive, less famous bit is better quality is several a ...
I was sent two router bits to compare. One is a famous name bit and the other is a bit that claims to be better.
Executive summary: The less expensive, less famous bit is better quality is several areas. However both are good bits and the only serious defect is the gouges in the shaft of the famous bit.
Famous bit bottom (shorter bit) and less expensive bit top (longer bit)
router_bit_comparison_from_carbide_processors.jpg
Famous Short Bit Shank DimensionsShank .497 to .499Also had two metal rips (see below)Metal rip sticks out to 0.517” Long Bit Shank DimensionsLong shank 0.498” everywhereNo ripped metal
router_bit_comparison_from_carbide_processors_(1).jpg router_bit_comparison_from_carbide_processors_(2).jpg








Above are the two rips in the metal of the famous bit. These are gouges (also called upsets) perhaps caused by the engraving tool since the engraved logo was poor quality. These are totally unforgivable. They interfere with a secure fit of the shank into the collet and will damage the collet.
router_bit_comparison_from_carbide_processors_(3).jpg
The surface on the famous bit above is smooth while the competition is rougher. In this case rougher is preferred since it will give a better grip.
router_bit_comparison_from_carbide_processors_(4).jpg router_bit_comparison_from_carbide_processors_(5).jpg







Famous above and competitor right
1. Steel body - both appear to be cast with famous bit having a rougher grain
2. Brazing - The brazing on the famous bit drew back into the gap which raises the question if the steel and carbide were prepared properly. The brazing on the competitor flowed out onto the steel which suggests properly prepared steel.
3. Grinding – the famous bit was ground with a coarser wheel. The less famous bit has vertical, very fine grind marks.
4. The famous blade has a straight top while the other has a rounded top. (The top is on the right of the picture.) The rounded top is sometimes called a “waterfall” grind and is generally considered superior as it allows for better control of fiber spring back.
router_bit_comparison_from_carbide_processors_(6).jpg router_bit_comparison_from_carbide_processors_(7).jpg







Sides of the bits. Famous left and competitor right.
There appears to be too little braze alloy on the famous bit. A thick layer of braze alloy (0.003” to 0.005”) greatly cushions the bit and allows for better cuts with longer life.


收藏 分享 邀请

相关阅读

最新评论

木工刀具论坛·免责声明

本站提供网上自由讨论使用,所有个人言论并不代表本站立场,与本站立场无关,本站不会对其內容负任何责任。
木工刀具网是非营利性交流网站,旨在进行个人学习和交流。本站内容均经过严格审查筛选,网站部分文章和资料均从网上搜集整理,由热心网友自由上传,版权归原作者所有,只做为交流学习之用,不得用于商业用途,法律后果自负。如您发现违反国家法律法规的相关內容,请立即联系我们,我们立刻从网站上删除,并致以最深的歉意。 Email:yygyfnn@163.com 微信:157561175

网站掌中彩开户| 关于我们| 广告招商| 帮助中心 手机版|Archiver|家具木工机械刀具 ( )   map

GMT+8, 2019-12-12 21:15 , Processed in 0.203129 second(s), 50 queries . 公网安备 33011802001189号

Powered by Templates © 2001-2017

返回顶部
平安彩票网站 周易彩票开户 飞艇投注 真龙彩票开户 福建快3走势 江苏快三质合走势图 大时代彩票投注 信彩彩票注册 北京11选5开奖 众易彩票注册